23 Mil. film
Window Security Film
23 Mil. Security Film
Installation of our 23 Mil. Film is applied to the inner most surface of your existing glass and anchored to your existing framing (inside of the building). Our films are much thicker and utilize a proprietary adhesive technology to achieve the strength that other films cannot.
- Thickness: 5/16"
- Fire Rating: 20 Minute (Without Hose Stream)
- Glass Weight: 5 lbs. sq/ft
- Construction: Proprietary
- Maximum Size: 72" X 96"
- Warranty: 5 Year Limited
Armoured One’s Security Film has passed a Class 1 Shooter Attack Test where the film is shot 10 times with an AR15 .223 round and then hit with a 100 lb. ram where the glass is struck minimally two (2) times at 50-foot pounds of force by the ram. If the ram penetrates the glass before the completion of the two hits, it is considered a failure. This test is completed by FILTI. This test was created to not only protect the people behind the glass, but also protect decision makers from liability.
- FILTI Shooter Attack Certified
- All Fire Certifications and Requirements
Attributes
BURNING CHARACTERISTICS
ANSI Z97.1 | 16 CFR CPSC 1201
WIND DEBRIS
UL972 BURGLARY GLAZING MATERIAL | EN356 P4A
BOMB BLAST & EXPLOSIVE PROTECTANT
FTD-SA-LEVEL 1
SAFETY GLAZING & GLASS BREAKAGE
ANSI Z97.1 | 16 CFR CPSC 1201
FORCED ENTRY & BURGLARY RESISTANT
UL972 BURGLARY GLAZING MATERIAL | EN356 P4A
SHOOTER ATTACK CERTIFIED
FTD-SA
Be wary of any Security Film that claims to be bullet proof or bullet resistant. There is no film in existence that will make existing glass bullet resistant (or bullet proof). If a company claims this, they are lying to you.
What Is The Purpose Of 23 Mil. Film
Armoured Ones 23 Mil. Shooter Attack Film was invented to retrofit into your existing windows to slow down or stop an active shooter, by slowing down an active shooter after they have shot the glass and film. Many companies claim to have window film that does this, but they have not tested to the FILTI Shooter Attack Certification level. Moreover, there is no film in the world that will make existing 1/4 inch glass bullet proof or bullet resistant through single layer application.
Where To Use
We recommend this for exterior locations, such as windows at vestibules, doors, classroom exterior windows, office windows, large gathering room windows, and entry ways.
Installation Details
Installation of our 23MIL film is applied to the inner most surface of your existing glass and anchored to your existing framing (inside of the building).
The Fastest Option To Secure Your School
Our film was created to be your fastest option to get your school secure by modifying existing windows. It does not require any construction, window removal, blocking off areas of the school, or anything that can disrupt the school day. Our certified team of installers go into the school and apply the film to the inside of the existing glass, making this the easiest and fastest option to secure your buildings.
*Notice* Our film is not bullet proof or bullet resistant (There is no film that is)
Our Film Has Already Saved Lives
Armoured One Film Stopped An Attack In November of 2015
In a world where violent attacks on schools have become all too common, Armoured One LLC stands as a beacon of hope. In November of 2015, our film proved its worth when it prevented a violent attacker from entering a school and harming innocent students and staff. For about 8 tense minutes, our shooter attack film held strong against the attacker’s attempts to break in. Those 8 minutes felt like an eternity, but they were enough time for the police to arrive and apprehend the assailant before any harm could be done. Thanks to our film, the attacker was unable to breach the school’s existing glass and carry out his violent intentions. The result? Zero injuries. Zero loss of life. And a community that was spared the trauma and tragedy of one of these attacks. But don’t just take our word for it. Listen to what the Superintendent had to say about that day below.
SHOOTER ATTACK CERTIFIED 23 MIL. FILM
WITH A 15 YEAR WARRANTY
Standard test method for simulating an active shooter attack
| Break Strength | 640 lbs/inch | Highest Rated Break Strength In The Industry |
| Elongation Strength | 230% | Highest Rated Elongation Strength In The Industry |
| Tensile Strength at Break | 35,000 | Highest Rated Tensile Strength In The Industry |
| Peel Strength | 10-11 lbs/inch | Highest Rated Peel Strength In The Industry |
| Forced Entry Test | UL972 | Anti-Burglary Test Method |
| Safety Standard For Architectural Glazing Material | ANSI Z97.1 | 16CFR CPSC1201 | Mandatory Building Code |
| Shooter Attack Test Method | FTD-SA-C1 (Third Party Tested) | Standard Test Method For Simulating An Active Shooter Attack |
OPTICAL AND SOLAR PRODUCT SPECIFICATION
- Table Key:
- Optical and Solar performance simulated using LBNL softwares (Optics and WINDOW 5.2) according NFRC methodology
- CARY 500 Scan Spectrophotometer
- Performance Data On 1/8" Clear Glass
- Table Key:
-
Optical and Solar performance simulated using LBNL softwares (Optics and WINDOW 5.2) according NFRC methodology -
CARY 500 Scan Spectrophotometer -
Performance Data On 1/8" Clear Glass
| No. | Parameter | Test Method | Measurement Tool | Spec | Unit | Comments |
| 1 | Haze | ASTM D 1003 | Haze Gard Plus | <4 | % | Film Only |
| 2 | Color B | ASTM D 2244 | MiniScan XE Plus | 4.2 | N/A | CIE-LAB D65/10 Film Only |
| 3 | Visible Light Transmitted | *Optical And Solar Performance Simulated Using LBNL Softwares (Optics And WINDOW 5.2) According NFRC Methodology | **CARY 500 Scan Spectrophotometer | 87 | % | ***Performance Data On 1/8” Clear Glass |
| 4 | Visible Light Reflected (Int) | * | ** | 12 | % | *** |
| 5 | Visible Light Reflected (Ext) | * | ** | 12 | % | *** |
| 6 | UV Block | * | ** | >99 | % | *** |
| 7 | Total Solar Energy Reflected | * | ** | 11 | % | *** |
| 8 | Total Solar Energy Transmitted | * | ** | 77 | % | *** |
| 9 | Total Solar Energy Absorbed | * | ** | 12 | % | *** |
| 10 | Shading Coefficient | * | ** | 0.93 | N/A | *** |
| 11 | Total Solar Energy Rejected | * | ** | 19 | % | *** |
| 12 | Solar Heat Gain Coefficient | * | ** | 0.81 | N/A | *** |
| 13 | U-Value Winter | * | ** | 1.03 | N/A | *** |
| 14 | K-Value Winter | * | ** | 5.85 | N/A | *** |
| 15 | Glare Reduction | * | ** | 3 | % | *** |